ZB-301 High Quality Industrial Equipment Winding Machine - Motor Winding Price List
It is suitable for automatic winding of the rotor of a commutator with slotted motor. Automatic alignment, indexing, winding, hooking, automatic pull off, all processes continuous work, the use of detachable replacement tooling, tension force elastic Adjustable, even winding, manual loading and unloading, high production efficiency.
Q: What types of motor rotors are compatible with this machine?
The machine is designed for commutator rotors with slotted motors having an even slot configuration, supporting rotor diameters ranging from Φ20mm to Φ90mm.
Q: What is the wire diameter range handled by the winding system?
The system supports wire diameters between 0.16mm and 0.55mm using the magnetic hysteresis tension method, and 0.30mm to 0.85mm using the electric control method (overall wire capacity Φ0.15~Φ1.05mm).
Q: What automated functions does the machine perform?
It features fully continuous automated processing for alignment, indexing, winding, hooking, and wire pull-off, with manual loading and unloading required.
Q: What are the operational power and pneumatic requirements?
It operates on a three-phase AC 380V ±10% 50/60Hz supply with a total power consumption of 3.0KW, and requires an operating air pressure of 0.5 to 0.7 MPa.
Q: What are the maximum winding and detection speeds?
Both the winding speed and angle detecting speed operate within an adjustable range of 0 to 2000 rpm, powered by dual 1.5KW winding motors and a 0.75KW angle detection motor.
Q: Can tooling be replaced for different rotor dimensions?
Yes, it uses detachable replacement tooling with elastically adjustable tension to accommodate lamination stack lengths from 25mm to 75mm and shaft diameters from 3mm to 12mm.
