1 / 5
Constant current, constant power, and constant voltage control.
Built-in cooling water tank for consistent continuous operation.
Imported PLC and touch screen with multi-section power supply.
Precise mechanical slot positioning with imported solenoid valve.
| Parameter Specification | Standard Value |
|---|---|
| Supply Voltage | AC380 ± 10% 50Hz |
| Air Pressure | 0.5 ~ 0.7 MPa |
| Rated Capacity | 0 ~ 50 kVA |
| Welding Current | 10000 A |
| Rotor Diameter | ≤ Φ90 mm |
| Wire Diameter | 0.12 ~ 1.2 mm |
| Shaft Diameter | ≤ Φ17 mm |
| Commutator Diameter | ≤ Φ40 mm |
This equipment is engineered specifically for automatic welding of commutators and rotor wires, supporting both hook-type and slotted-type motor configurations.
The machine handles rotor diameters up to ≤Φ90mm, shaft diameters up to ≤Φ17mm, commutator diameters up to ≤Φ40mm, and wire diameters between 0.12mm and 1.2mm.
It features constant current, constant power, and constant voltage output with progressive current slow-rise and slow-down capabilities, effectively preventing spatter and ensuring uniform, high-strength welds.
Workpieces are mechanically aligned to the slot with configurable angle compensation, managed seamlessly by an imported PLC controller and intuitive touch screen display.
Yes, it features a built-in cooling water tank together with imported solenoid valves to govern the welding cylinder, maintaining continuous, reliable, and temperature-controlled duty cycles.
