1 / 5
| Supply Voltage | AC 380V ±10% 50Hz |
| Air Pressure | 0.5 ~ 0.7 MPa |
| Total Power | 3 kW |
| Lamination Thickness | 25 ~ 75 mm |
| Commutator OD | Φ20 ~ Φ50 mm |
| Rotor Diameter | Φ20 ~ Φ90 mm |
| Shaft Diameter | Φ3 ~ Φ12 mm |
| Wire Range | Φ0.15 ~ Φ1.05 mm |
It is designed for the automatic winding of commutator rotors with slotted motors, supporting continuous alignment, indexing, winding, hooking, and wire cutoff.
The system accommodates magnetic hysteresis wire control from 0.16mm to 0.55mm and electric control methods from 0.30mm to 0.85mm (operating specification range spans 0.15mm to 1.05mm).
The machine supports rotor outer diameters from 20mm to 90mm (armature OD 20~60mm), stack lengths of 25~75mm, shaft lengths under 300mm with diameters between 3~12mm, and commutator diameters of 20~50mm.
The equipment requires a 3-phase AC380V (±10%) 50/60Hz power supply with a total power consumption of 3.0kW, and an operating pneumatic pressure of 0.5 to 0.7 MPa.
The unit operates with a winding speed of 0~2000 rpm and an angle detecting speed of 0~2000 rpm, with a programmable winding turn count from 0 to 9999 turns.
